HeatRay Non-Glowing Heaters can be ceiling or wall mounted, as well as incorporated into various structures such as pergolas, trellises, gazebo, marquees, conservatories, garages, sheds or other shelters, fixed awnings and commerical grade patio umbrellas. The Non-glowing vandal proof heaters are suitable for both indoor and outdoor applications.
The HeatRay product range has been developed to address specific requirement of the outdoor and indoor environments. To help you select the best solution for either a commercial trading space, or a private patio, we have created a simple product selection guide.
Non glowing panels are IP X5 (NEMA 4) rated, which means they are protected against unforeseen exposure to rain or water jets. This enables the heaters to be installed outdoors and safely washed and rinsed with low pressure water cleaners and garden hoses.
Two-stage HIGH - LOW heat output allows the provision of an optimum heat comfort when experiencing varying ambient cold conditions. This arrangement brings additional benefit of lowering the overall power consumption, thus the running costs, when higher heating power is not needed.
Each heating panel covers 15 sq ft - 30 sq ft of floor space depending on the installation height and final application.
The HeatRay Non glowing heating system aims soft energy in a specific direction to warm people and objects in its path, instead of wasting energy trying to heat unoccupied spaces.
Why run heaters in areas that are not in use, operate multiple groups of heaters independently of each other (up to 4, 8 or 12 heaters per heating zone) with dedicated Heatray control modules.
HeatRay Non Glowing Radiant Panel Heaters have undergone extensive independent laboratory testing to establish full compliance to the UL & CSA Listing in US & Canada as well as European CE marking and Australian & New Zealand AS /NZ Certification. Above approvals incorporate Compliance with Outdoor Usage, as well as Design Integrity, Product Application and Heat Effect on Structures.
Dimensions (L/W/H):
37½” x 6″ x 2″
Weight:
14 pounds (without mounting bracket)
Power Requirements:
1.2kW / 10A – 120V / 1Ph / 60Hz
Heating Coverage:
16 sqr ft – 30 sqr ft, depending on the application.
Dimensions
37½”L x 6″W x 2″H
Weight
14lb without mounting bracket
Power Connection
Wire allocation in
the supply cable
Supplied with 5ft of 4 Core + GND ‘pigtail’ cable
Conductor #1 – Hot for heating Circuit A
Conductor #2 – Hot for heating Circuit B
Conductor #3 – Neutral for heating Circuit A
Conductor #4 – Neutral for heating Circuit B
Mounting
Wall / Ceiling Mount Brackets / Under Beam
Side Beam / Ceiling Recessed / Mount Brackets
Application
Indoor and Outdoor Use
USA / Canada
Total input power: 1200 Watts
Input power per stage: 600 Watts
Working Voltage: 120 Volt / 1Ph / 60Hz
Total current load: 10 Amp
Current per heating stage: 5 Am
NOTES:
Non glowing heating panels can be indirectly connected to 208V/120V 3-Phase / 4-wire / WYE / or 240 Volt Split-Phase with Mid-Point Neutral Power system when properly interfaced via HeatRay’s POWER CONTROL MODULES.
Please refer to the TECHNOLOGY tab & ELECTRICAL DIAGRAM section of our website for further details
Non-glowing heaters can be mounted using U-shaped ‘Ceiling/Wall Brackets’. These are available in a number of sizes to provide a 5″, 8″, 12″ or 18″ drop from the ceiling or an offset from the wall.
CWMB-5
This bracket allows the heating panel to be suspended 5 inches below the ceiling.
CWMB-8
This bracket allows the heating panel to be suspended 8 inches below the ceiling.
CWMB-12
This bracket allows the heating panel to be suspended 12 inches below the ceiling.
CWMB-18
This bracket allows the heating panel to be suspended 18 inches below the ceiling.
For areas where the ceiling is at the appropriate height, Non-glowing heaters can be mounted flush with the ceiling by utilizing ‘Ceiling Recess Units’.
CFM
Ceiling Recess Unit.
When a ceiling is higher than 8 feet, Non-glowing heaters will need to be dropped to the optimal mounting height by implementing ‘Ceiling Tube Suspension’ units. The standard length of the suspension tubes is 36″ and can be trimmed on-site to any shorter length.
CSTS
Ceiling Single Tube Suspension.
To allow Non-glowing radiant patio heaters to be grouped into pairs, ‘Ceiling Double Tube Suspension’ units are required. This system allows the paired heaters to be mounted at the optimal mounting height of 8 feet. The standard length of the suspension tube is 36″ and can be trimmed on-site to any shorter length.
CDTS
Ceiling Double Tube Suspension.
Non-glowing heaters can be easily integrated with the entire range of our HeatRay Heated Umbrellas. The radiant Non-glowing heaters get seamlessly attached under the arms of the patio umbrellas for optimal warmth distribution.
UMB M RAIL
Umbrella Mounting Rail.
UMB-DHB 2.0
Umbrella double mounting unit for non-glowing heaters.
UMB-DHB 2.5
Umbrella double mounting unit for non-glowing heaters.
The HeatRay product range has been developed to address specific requirement of the outdoor and indoor environments. To help you select the best solution for either a commercial trading space, or a private patio, we have created a simple product selection guide.
Dominics Steakhouse, in Scottsdale Arizona, recently installed Heatray Electric Radiant Heating Panels (ERH) in their outdoor dining area. The outdoor area features seating around a central rectangular pool, with solid awnings surrounding. 40 ERH heaters were recessed into the solid awnings and are controlled by 10 control modules to allow for zoned heat control.
The luxury Joule Hotel in Dallas features a rooftop pool deck on the 10th floor, home to the Joule's funky pool and bar area. The hotel required a heated area within the rooftop deck to cater for chillier times. Heatray CR53 Umbrellas with full weather protection accessories and heating were installed to create a water tight, warm area for the rooftop deck. The installed weather protection accessories include: roof infills, side covers, wind columns, linking gutters, perimeter gutters, door sections and Electric Radiant Heaters (ERH).
The Skyroom at Times Square in New York City, offers the city's highest rooftop lounge. Set across two floors of the Sheraton and Suites by Marriott, the lounge boasts views of the Hudson River and Empire State Building.
On the 34th floor deck, Heatray CS40 & CR45 Heated Umbrellas were recently installed to provide weather protection and heating. The system has been designed for frequent collapsibility and installation of window cleaning platforms suspended on multiple davits for high rise window cleaning operations.
The entire Heatray Umbrella system has been custom designed and rated for hurricane category 2 and moderated snow loads. Further, linking gutters joining umbrellas together, have been equipped with heat tracing electric heating systems for snow and ice melting during winter.
If your business requires an enhancement of the outdoor patio environment, with an intention of completely eliminating any negative impacts the inclement weather may impose on your business’ profit margin, we would be happy to discuss the possibility of implementing HeatRay’s worldwide proven heating technologies at your outdoor venue.
