HeatRay Infrared Glowing Heaters convert electric energy to instant infrared radiant heat, the same as the sun’s energy but without the harmful ultraviolet rays. HeatRay electric patio heaters warm people and surrounding objects, not the air or empty spaces. Energy is not wasted trying to heat the air. There are no emissions or naked flames and no gas bottles to contend with.
The infrared patio heaters reach full operating temperature within seconds of activation. Operation is achieved via individual switching of each heater, or zone control of multiple units.
Infrared electric patio heaters can be wall, ceiling or custom mounted, indoors or out. They are suitable for alfresco dining, restaurants, pubs, clubs, smoking areas, schools, warehouses and much more.
The HeatRay product range has been developed to address specific requirement of the outdoor and indoor environments. To help you select the best solution for either a commercial trading space, or a private patio, we have created a simple product selection guide.
Glowing heaters are IPX5 (NEMA 4) rated, which means they are protected against unforeseen exposure to rain or water. This enables them to be installed outdoors and safely washed and rinsed.
The HeatRay Glowing heaters system aims energy in a specific direction to warm people and objects in its path, instead of wasting energy trying to heat empty space.
Why run heaters in areas that are not in use, operate multiple groups of heaters independently of each other (up to 4, 8 or 12 heaters per zone) with control modules.
Two-stage HIGH - LOW heat output allows the provision of an optimum heat comfort when experiencing varying ambient cold conditions. This arrangement brings additional benefit of lowering the overall power consumption, thus the running costs, when higher heating power is not needed.
HeatRay Radiant Glowing Heaters have been built in full compliance to the UL1278 & CSA C22.2 Standards being Listed in the US & Canada by ETL-Intertek. The product also carries European CE marking and obtained Australian & New Zealand AS /NZ Certification.
Dimensions (L/W/H):
26½” x 4″ x 3″
Weight:
7 pounds (without mounting bracket).
Power Requirements:
1.5kW / 12.5A – 120V / 1Ph / 60Hz
Heating Coverage:
20 sqr ft – 40 sqr ft, depending on the installation height and final application.
Dimensions
26½”L x 4″W x 3″D
Weight
7 lb without mounting bracket
Connection
3 Core lead
Mounting
Wall / Ceiling Mount Bracket
Application
Indoor and Outdoor Use
USA / Canada
Power: 1.5kW Current: 12.5A Voltage: 120V / 1 Ph / 60Hz
Europe
Power: 1.5kW Current: 6.25A Voltage: 220V – 240V / 1 Ph / 50Hz
Australia
Power: 1.5kW Current: 6.25A Voltage: 220V – 240V / 1 Ph / 50Hz
Minimum Mounting Height
85″
Clearance from Flammables
60″
Ceiling Clearance
12″
Side Distance to Wall
60″
If your business requires an enhancement of the outdoor patio environment, with an intention of completely eliminating any negative impacts the inclement weather may impose on your business’ profit margin, we would be happy to discuss the possibility of implementing HeatRay’s worldwide proven heating technologies at your outdoor venue.
